Sunday, September 22, 2013

How to Spray Paint Your Car

Most people avoid painting their car themselves because they are afraid of not doing it properly. This fear is completely justified as you might end up ruining the look of your car, and would require the services of a professional to get it right. However, learning how to paint your car properly would give you greater control of the design of the vehicle, and you would save a considerable amount of money as well.
Before starting, park the car in a well-ventilated area which would make drying easier. Use duct tape and plastic sheets to cover portions of the car which won't be painted like windows, lights and mirrors. You could also choose to remove these parts. Rub the entire surface of your vehicle with medium-grit sand paper. Ensure that you don't miss a spot and that the surface is even. Wipe with a dry towel to remove any foreign particles.

Onto the surface of the car, apply a layer of primer. Use a brush to ensure that the primer is spread thinly and evenly. Leave it to dry for as long as it takes, which should not be more than three hours. Using fine grit sandpaper, rub the surface of the car. Do the sanding in a back and forth motion, and ensure that the surface is completely even. Now you can remove any dirt and sand particles using a dry towel.
Before using the can of spray paint, remember to shake it properly. Make sure that the can works well by spraying the paint over some old newspapers before using it on your car. After checking, spray the paint onto the car from the distance recommended by the paint manufacturer. During the first coat, the paint will be a light shade. Do not over spray, and leave the coat as it is. The paint will be evened out later on. After applying the first coat, leave it to dry for an hour or two.
Repeat the same spraying process as earlier two more times for a total of three coats. If you feel that the paint is not dark enough, you can apply an extra coat of paint as well. After you have completed the painting process, leave the final coat of paint to dry for at least three hours.
After it has dried, apply a clear finishing coat using a brush. Use fine grit sandpaper to sand out the surface, and apply another layer of clear finish. Repeat the sanding process with an extremely fine sandpaper to completely polish and buff the vehicle's surface. Apply one last layer of clear coat, and leave the vehicle to dry.
The painting process has been completed, and you are free to remove all the protective tapes and sheets. Wipe the newly painted surface with a microfiber cloth dipped in polish, to add some extra shine to your vehicle.
Remember to paint your vehicle in a well-ventilated environment, while wearing all necessary protective gear. Paints are toxic and could pose numerous health hazards.
 is known for providing quality spray painting and body shop supplies to the panel beating industry throughout Melbourne's eastern suburbs. It is the perfect one-stop-shop for the DIY repairer and car restorer. For more details visit their website

No comments:

Post a Comment